25khz 2000W Electrolytic Ultrasonic Cleaner Of Plastic Injection Mold With Power Generator


◆ Process flow: electrolytic cleaning → municipal water washing → rust prevention


◆ Main components: ultrasonic generation system, electrolytic circuit system, circulating filtration system


◆ Working principle: use the mold or the workpiece to be cleaned as the cathode (put it into the cleaning frame), and use the standard electrode rod as the anode. Using the action of electrolytic water, oxygen is produced at the anode and hydrogen is produced at the cathode. During the operation, a large amount of hydrogen is generated on the surface of the workpiece, which makes the dirt quickly decompose and peel off from the surface of the workpiece; At the same time, the cavitation effect of ultrasound is used to make numerous small bubbles collide with the object. Conduct impact blasting on the dirt on the workpiece to make the dirt peel off automatically.


At the same time, the solution of special detergent 102C is used to make the dirt decompose rapidly through sufficient chemical reaction. In this way, even the complex parts that are difficult to clean, such as the grooves, grooves, corners, holes, holes, and undercuts inside the mold, will be cleaned clean, and the mold will show brilliant metallic luster from inside to outside.


The cleaned mould shall be washed with water and then soaked with special water-based anti-rust agent for steel. This anti-rust agent can quickly remove moisture from the mold surface and form protection on the mold surface. After drying, it can be stored or reprocessed. The re-production will not produce carbide attached to the mold.


◆ Scope of application: plastic mold, hardware mold, optical mirror mold, rubber mold, medical equipment, auto parts mold, etc


Note: various non-standard models and sizes can be customized according to customer requirements

TypeFrequency (Khz)Power(W)Capacity(L)
PU-30LTT28KHZ,40KHZ150030
PU-50LTT28KHZ,40KHZ250050
PU-70LTT28KHZ,40KHZ350070

25khz 2000W Electrolytic Ultrasonic Cleaner Of Plastic Injection Mold With Power Generator

25khz 2000W Electrolytic Ultrasonic Cleaner Of Plastic Injection Mold With Power Generator_Company dynamics_Pulisonic Ultrasonic

Last:Inject Mould Oil Cleaner Electrolytic Ultrasonic Metal Parts Degreasing Cleaning Machine And Power S
Next:28khz 500W Double Tanks Electrolytic Ultrasonic Cleaning Equipment For Mold Washing And Signal Gener

Copyright © 2012-2022 Pulisonic ultrasonic Co.,Ltd
在线客服