Circulating ultrasonic cleaning machine

1. The wide frequency sweep circuit is adopted. With the change of the liquid temperature, the ultrasonic frequency will sweep back and forth in the range of about ± 1KHz at the center frequency. According to the frequency of the power grid, the frequency will be 50 times per second, which can drive the cleaning fluid and cavitation bubbles to form a fine return flow, completely eliminate the cleaning blind area caused by the standing wave field, and at the same time, make each transducer reach the best resonance state.

2. It adopts high-power module control, with strong output power, and greatly improves the safety performance of the electric control cabinet generator, effectively protecting the normal operation of the transducer; At the same time, a soft start system is built in to reduce the strong impact of current on the transducer during startup and extend the service life of the transducer.

3. The side attached high-frequency ultrasonic combination bombardment mode is adopted. The high-frequency ultrasonic transducer can not only clean the gap deeply, but also not damage the workpiece surface. It has the characteristics of high bombardment intensity, fast cleaning speed, high ultrasonic density, good penetration, etc;

4. Overvoltage, over-temperature and over-current protection circuits are designed, which are safe, reliable and guaranteed.

5. Install pneumatic sealing cover to prevent heat emission or solvent volatilization during operation

6. The timing switch is configured, and the cleaning time can be set by yourself

7. The filter circulation device filters the impurities generated after cleaning the solvent, so that the solvent can be used in a cyclic manner. Due to the use of advanced technology, its cleaning capacity can be recycled automatically, and it can be separated from the cleaning agent through physical filtration, greatly reducing the cleaning operation cost. The system adopts automatic circulating filtration mode and safe and reliable anti-corrosion pump to make the cleaning agent pass through the filter screen and professional precision filter, which can effectively separate and remove the tiny particles of pollutants, oil, dust and other pollutants and impurities in the cleaning solution, so as to ensure that the cleaning agent is always in a clean and efficient cleaning state, and at the same time minimize the secondary pollution caused by pollutants in the cleaning solution when the workpiece is taken out.

25KHZ 3000W Ultrasonic Filter Cleaner Industrial Heated Ultrasonic Bath Cleaner_Company dynamics_Pulisonic Ultrasonic

Last：28KHZ Large Industrial Ultrasonic Cleaner With Filtering Circulation Function Metal Parts Oil Cleane
Next：Customized Ultrasonic Filter Cleaning Machine For Motor Parts / Electronic Components