Ultrasonic anilox roll cleaning machine

1、 The frequency of the ultrasonic cleaning machine should be within the range recommended by the manufacturer, and the * frequency obtained after many trials should be used for cleaning. The higher the ultrasonic frequency is, the smaller the volume of bubbles in the liquid is, and the weaker the strength is. Generally, the recommended frequency is 40KHz. At this frequency, the smallest bubbles will be generated to go deep into the mesh hole for cleaning. However, due to the different nature of the anilox roll and the design of the ultrasonic cleaning machine, the recommended frequency is only for reference.

2、 The temperature of the cleaning agent will also affect the cleaning quality. If the temperature is high, the viscosity of the cleaning agent will be low, and the amount of bubbles in the liquid will increase, thus increasing the ability of ultrasonic cleaning. The temperature of cleaning agent should be controlled at 40~60 ℃, and the cleaning agent must be special ultrasonic cleaning agent.

3、 The time control of the ultrasonic cleaning machine is very important, because the longer the ultrasonic emission time is, the more likely it is to damage the surface of the anilox roll and the mesh cavity wall. At present, ultrasonic cleaning machines in many countries in Europe and the United States have pretreatment systems. Generally speaking, the safe cleaning time to ensure no damage to the anilox roll does not exceed 5 minutes, and the actual operation needs to be adjusted according to different anilox rolls.

4、 The essence of ultrasonic cleaning is not to achieve the purpose of cleaning by vibration. Vibration is only an inevitable by-product of the transducer when it is working; The cleaner with higher mass density will have the effect of co-vibration, so as long as there is no defect in the goods, the general micro-shock will not have consequences. However, the ceramic anilox roll is a kind of high density and brittle material. If there are damage cracks, the common vibration will easily expand it (the metal roll does not have this situation), so it should be carefully checked before cleaning. However, the cracked ceramic anilox roll itself belongs to the damaged anilox roll. Even if it is cleaned by other methods instead of ultrasonic cleaning machine, it is extremely easy to aggravate its damage, just like the cracked bowl and other porcelain.

Automatic Anilox Roll Ultrasonic Cleaning Machine Customized Single Tank Industrial Ultrasonic Cleaner_Company dynamics_Pulisonic Ultrasonic

Last：3000W Ultrasonic Metal Ceramic Anilox Roller Roll Surface Cleaner Machine
Next：80KHZ 1000W High Frequency Submersible Underwater Waterproof Ultrasonic Cleaner Transducers