Full-automatic ultrasonic cleaning machine
1. Do not collide or shock the four-slot ultrasonic cleaner violently.
2. The four-slot ultrasonic cleaning machine should be cleaned properly, and the power should be turned off when not in use.
3. The machine should not be placed in a humid environment.
4. Keep away from heat sources. The cleaning solution should be accumulated, filtered or changed in time to ensure the cleaning results.
5. It is forbidden to splash conductive liquid (such as water) from the air inlet at the top of the ultrasonic control cabinet. Otherwise, the circuit system of the ultrasonic cleaner will be seriously damaged.
6. Before stopping the washing machine that has been running for a long time, first set the power knob to zero, and then use its fan to shut down after another 3-6 minutes to ensure that the heat inside the power supply is dissipated.
7. The duration of the continuous task of the machine shall not exceed 4 hours. If the duration of the continuous task is too long, rotate the ultrasonic conditioning knob to the '0' position, and let the cooling fan inherit the task. When the ultrasonic cleaning is not started, continue the heat dissipation in the ultrasonic control cabinet for at least 2 minutes.
25khz Industrial Ultrasonic Cleaner System for Auto Parts DPF Engine Block Carbon Cleaning Machine_Industry news_Pulisonic Ultrasonic
Last:40khz Large Industrial Ultrasonic Cleaning Equipment Automatic Ultrasonic Cleaning Machine
Next:Oil Stain Cleaning Of Hardware Auto Parts Fully Automatic Cleaning Ultrasonic Cleaning Equipment