Ultrasonic Cleaning Machine With Circulating Filter 28KHz For Auto Parts


PULISONIC Ultrasonic Cleaning Machine With Circulating Filter 28KHz For Auto Parts


Circulating ultrasonic cleaning machine

1. The wide-band frequency sweeping circuit is adopted. With the change of liquid temperature, the ultrasonic frequency sweeps back and forth within the range of about ± 1kHz around the central frequency, and 50 times per second according to the power grid frequency. In this way, the cleaning liquid and cavitation bubble can be driven to form a slight backflow, the cleaning blind area caused by standing wave field can be completely eliminated, and each transducer can reach the best resonance state at the same time.

2. It adopts high-power module control, which has strong output power, greatly improves the safety performance of the generator of the electric control cabinet, and effectively protects the normal operation of the transducer; At the same time, the built-in soft starting system can reduce the strong impact of current on the energy converter and prolong the service life of the transducer.

3. The side attached high-frequency ultrasonic combined bombardment mode is adopted. The high-frequency ultrasonic transducer can not only go deep into the gap for cleaning, but also does not damage the workpiece surface. It has the characteristics of high bombardment intensity, fast cleaning speed, high ultrasonic density and good penetration;

4. Overvoltage, overtemperature and overcurrent protection lines are designed, which are safe, reliable and guaranteed.

5. Install pneumatic sealing cover to prevent heat emission or solvent volatilization during operation

6. The timing switch is configured, and the cleaning time can be set by yourself



Model

Internal size
L*W*H (mm)

Outsize mm
L*W*H (mm)

Frequency (Khz)

Power(W)

Heating(W)

Total power(W)

voltage

PLS-DQXJ-1006

280×210×210

320×250×350

20,28,33,40,80,130

300

1000

1300

220V

PLS-DQXJ-1012

400×310×280

520×430×600

20,28,33,40,80,130

600

3000

3600

220V

PLS-DQXJ-1018

490×360×320

610×480×675

20,28,33,40,80,130

900

3000

3900

220V

PLS-DQXJ-1024

630×430×320

740×550×675

20,28,33,40,80,130

1200

4000

5200

220V

PLS-DQXJ-1030

630×530×320

750×650×675

20,28,33,40,80,130

1500

4000

5500

220V

PLS-DQXJ-1036

680×530×360

800×650×700

20,28,33,40,80,130

1800

5000

6800

220V

PLS-DQXJ-1040

680×570×400

830×710×735

20,28,33,40,80,130

2000

5000

7000

220V

Welcome OEM size enquire




1-1.jpg

1-2.jpg


Ultrasonic Cleaning Machine With Circulating Filter 28KHz For Auto Parts_Ultrasonic Cleaner_Pulisonic Ultrasonic

Last:Industrial Ultrasonic Cleaner 28KHz/40KHz For Auto Metal Parts Cleaning
Next:SUS316 Rod Type Ultrasonic Cleaner Device For Pipe Cleaning

Copyright © 2012-2022 Pulisonic ultrasonic Co.,Ltd
在线客服